There are quite a few methods for preparing thin-film lithium niobate (TFLN), such as CVD, MBE, PLD, and sputtering. However, these tend to either produce grain boundaries and defects or have inaccurate lithium-niobium ratios. So for making devices like optical modulators and waveguides, we generally use the Smart Cut process. The basic principle of this…
Technology
Low-Bending-Loss Process and Improvements for Glass Waveguides in CPO
This article is part of the WaytoICT paid reading column. The technical analysis and accompanying schematics require a ¥9.9 payment to unlock! By locally raising the refractive index, the mode field of the waveguide can be matched to that of single-mode fiber. Through the above approach, the bending radius can be reduced, thereby lowering bending…
Some Views on Modulators and LPO/CPO
This is a WaytoICT paid-reading column. The full technical analysis and accompanying schematics require a ¥9.9 payment to unlock! On the technology route, most manufacturers believe that in the next five years, pluggable modules will definitely remain the market mainstay, but LPO and CPO have very strong momentum and are star players. Google is expected…
UESTC: Microchannel Liquid-Cooling Co-Packaged CPO Scheme
This is a WaytoICT paid-reading column. The full technical analysis and accompanying schematics require a ¥9.9 payment to unlock! On the other hand, optical chips are far more sensitive to temperature changes than electrical chips. Taking lasers as an example, for every 10-degree rise in temperature, their lifetime may drop by more than 70%. In…
