Skip to content

WaytoICT

通往ICT之路 · 光通信与AI网络技术解读

中文English
登录注册
Menu
Technology Optical comms · silicon photonics · CPO → Market Insights Financials · trends · industry → In-Depth Analysis Optical chips, devices & modules → Video Understand a topic in minutes → Documents Latest docs · summit materials →
Menu

Why Does an EML Transmit Farther Than a DFB?

Posted on 2026-01-18 by

Let’s first explain a concept: chirp.

In AM (amplitude modulation), we distinguish “1” and “0” by the level of the signal amplitude. Modulation in which the frequency changes over time is FM (frequency modulation).

Why does an EML transmit farther than a DFB?
The laser used at the very beginning was DML direct modulation, also called internal modulation. Its principle is to apply an alternating or pulsed voltage directly to the laser source to change the output light intensity.
Why does an EML transmit farther than a DFB?
For example, the DFB laser has exactly this structure. We use a varying current to change the “gain” and “carrier density” in the active region, making the laser rapidly switch between “bright” and “dim” states to achieve intensity modulation.
Why does an EML transmit farther than a DFB?
However, while changing the light intensity, the effective refractive index inside the laser also changes instantaneously, which means the optical length of the resonant cavity changes momentarily.
According to physics, this causes an instantaneous shift in the output light’s wavelength (that is, frequency). This instantaneous change in frequency is chirp.
So chirp describes the phenomenon of the signal frequency changing over time, a characterization of the pulse in the time domain. We usually describe it with the chirp coefficient α, also called the linewidth enhancement factor.
Why does an EML transmit farther than a DFB?
dn/dN represents the rate of change of refractive index with respect tocarrier density, the direct physical cause of chirp;
  • dg/dN represents the rate of change of optical gain with respect to carrier density, the basis for achieving lasing and amplitude modulation.
Chirp causes the signal frequency to shift, and light of different frequencies travels at different speeds in the fiber. If the frequency shifts and broadens, it causes time delay.
Why does an EML transmit farther than a DFB?
It should be clear that chirp itself does not “produce” dispersion. Dispersion is an intrinsic physical property of the fiber; it exists regardless of whether the signal has chirp. But in the time domain, dispersion causes inter-symbol interference.
Why does an EML transmit farther than a DFB?
Therefore, directly modulated DFB lasers have relatively high chirp and poor tolerance to dispersion, limiting both transmission distance and rate.
But the advantage of the DFB is low cost, low power consumption, compact structure, and simple driving. It is typically used in short-distance intra-data-center interconnects, 5G fronthaul, and access networks (such as GPON).
Therefore, to minimize the impact of chirp, we no longer directly modulate the laser’s output intensity; instead, we use an external modulator after the laser output to modulate the light wave.
Why does an EML transmit farther than a DFB?
For example, the EML laser can be regarded as a DFB laser plus an EAM electro-absorption modulator. Here the DFB is only responsible for emitting continuous-wave light, while the EAM controls the on/off of the light by changing the absorption coefficient through voltage.
Why does an EML transmit farther than a DFB?
Lumentum’s Differentially Driven EML Chip
This process has very little impact on the optical frequency, which means the chirp introduced by the EML is extremely low.
So can the laser’s chirp be completely eliminated? Yes, it is feasible, for example by using a light source scheme that supports an MZM modulator.
Why does an EML transmit farther than a DFB?
It uses the push-pull operation of the MZM: we apply voltages of equal magnitude and opposite polarity to the two waveguide arms separately.
Why does an EML transmit farther than a DFB?
In this way, the refractive index change is converted into a pure phase difference. The phase delay of one beam and the phase advance of the other are completely symmetric.
From the perspective of the whole device’s input and output, this symmetric process introduces no net phase shift that changes over time, that is, no frequency chirp.
Finally, let’s summarize with a table:
Why does an EML transmit farther than a DFB?
A brief introduction, thanks for reading and supporting!
Lumentum’s Differentially Driven EML Chip
Lasers: FP, DFB and DBR
Welcome to subscribe to our column: Silicon Photonic Devices + Optical Modules + Chips. Add WeChat WaytoICT to join the Semiconductor & Optical Component Industry Chain Group 2.
Welcome to join our community and access a wealth of high-value technical documents and trend research reports in the fields of semiconductor chips, optical components, and optical modules!

Why does an EML transmit farther than a DFB?
If you are interested in semiconductors / optical components / optical modules / optical fiber communications

Welcome to follow us!


Related Reading

  • What Is an EML? Working Principle, Applications, and Evolution of Electro-absorption Modulated Lasers
  • High-Speed EML Laser Anti-Reflection Structures and Solutions
  • Animation: What Is the Difference Between FP Lasers and DFB Lasers?

Enjoy this article?

Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.

Category: Technology

Leave a Reply

You must be logged in to post a comment.

订阅更新

订阅后,新文章发布时第一时间收到邮件通知

李东霏
光互连技术研究者

香农信息技术研究院,专注光模块、CPO、硅光与 AI 光互连的技术解读。

行业报告

光芯片·光器件·光模块 2026 报告汇编(含 OFC 2026)

光芯片 · 光器件 · 光模块
2026 报告汇编(含 OFC 2026)

¥1,900

上/下两册,收录 OFC 2026 一线报告
添加微信 WaytoICT 订购

广告

📢 广告位招商:面向全球光通信客户 侧边栏广告位 Email:Dongfei.li@shannoninstitute.cn

最新文档

  • 互连拐点:11 页解析机架内到多机架 Scale-Up 的 XPO/CPX/OCI 蓝图(OCP 2026 全球峰会)
  • AI 时代的相干光技术:17 页解析 Scale-Across、液冷 XPO 与全谱转发器(OCP 2026 全球峰会)
  • XPO 高密度光互连的系统级评估:20 页解析 212G SerDes 平台与 FRO/LRO/LPO 实测(OCP 2026 全球峰会)
  • CPO 与 OCI 标准及未来技术:17 页 Broadcom 精简版演讲提纲(OCP 2026 全球峰会)
  • VCSEL 高密度互连:7 页解析 50G NRZ「慢而宽」阵列与光 PCIe 演示(OCP 2026 全球峰会)

最新评论

暂无评论,欢迎登录后发表第一条评论。

最近访客

👥 今日访客 -
加载中…
© 2026 WaytoICT | 蜀ICP备2020035321号-2 | 隐私政策 | 免责声明
Wechat Pay
Alipay
请使用 支付宝 或 微信 扫码支付