Skip to content

WaytoICT

通往ICT之路 · 光通信与AI网络技术解读

中文English
登录注册
Menu
Technology Optical comms · silicon photonics · CPO → Market Insights Financials · trends · industry → In-Depth Analysis Optical chips, devices & modules → Video Understand a topic in minutes → Documents Latest docs · summit materials →
Menu

What is the Principle of Direct Detection?

Posted on 2025-02-10 by

A directly modulated laser (DML) can be used to modulate optical power. In a DML, the laser output power is adjusted by changing the pump current in the laser gain medium. As shown in the figure below, the pump current is controlled by an electrical drive signal. The modulation format of this type of direct detection (DD) system typically uses on-off keying (OOK). In other words, the pump current of the DML is varied by a binary signal.

What is the Principle of Direct Detection?

After transmission through the fiber and photoelectric detection, the receiver performs clock recovery and sets an appropriate threshold to determine whether the received symbol is a logic 0 or 1. In general cases, adaptive digital filtering is not adopted, and if inter-symbol interference exists, it is not mitigated before symbol decision. In addition, for short-distance transmission, forward error correction (FEC) coding is usually not used.

The advantage of the DML is that its modulation process is implemented inside the laser source, requiring no optical coupling between the laser and the modulator. This approach can minimize manufacturing and packaging costs. DML-based DD systems are suitable for 10 Gb/s systems. Research and laboratory demonstrations show that the DML can achieve a bandwidth exceeding 50 GHz and can modulate data at rates exceeding 100 Gb/s. However, the application of DML-based DD systems is mainly limited by the finite extinction ratio of the DML and issues such as laser chirp, that is, modulation directly changes the laser frequency.

Higher signal integrity can be obtained by using an external modulator, as shown in the figure below.

What is the Principle of Direct Detection?

For DD systems, a popular external modulator is the electro-absorption modulator (EAM). The EAM is usually manufactured in the form of a semiconductor waveguide and is equipped with electrodes to apply an electric field in the direction perpendicular to the beam propagation direction. The applied electric field changes the optical absorption spectrum of the semiconductor (thereby changing the modulator output power), a characteristic known as the Franz-Keldysh effect. The EAM can operate at a low drive voltage (about 2 V) and can provide a bandwidth exceeding 100 GHz. They can be integrated on the same chip with a distributed feedback laser; this combination of laser and EAM is called an electro-absorption modulated laser (EML).

Although the EML has a better extinction ratio than the DML, it still produces modulation chirp. To avoid this, a Mach-Zehnder modulator (MZM) can be used. The MZM is a different type of external modulator that achieves intensity modulation by combining two phase modulators in a Mach-Zehnder interferometer scheme. Using differential drive or a push-pull configuration, the MZM can achieve chirp-free modulation. The figure below shows a schematic of an MZM-based IM-DD system.

What is the Principle of Direct Detection?

Related Reading

  • What is Direct Detection?
  • Probabilistic Constellation Shaping (PCS) (2)
  • Does 800G in Data Centers Use PAM4 or Coherent Technology?

Enjoy this article?

Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.

Category: Technology

Leave a Reply

You must be logged in to post a comment.

订阅更新

订阅后,新文章发布时第一时间收到邮件通知

李东霏
光互连技术研究者

香农信息技术研究院,专注光模块、CPO、硅光与 AI 光互连的技术解读。

行业报告

光芯片·光器件·光模块 2026 报告汇编(含 OFC 2026)

光芯片 · 光器件 · 光模块
2026 报告汇编(含 OFC 2026)

¥1,900

上/下两册,收录 OFC 2026 一线报告
添加微信 WaytoICT 订购

广告

📢 广告位招商:面向全球光通信客户 侧边栏广告位 Email:Dongfei.li@shannoninstitute.cn

最新文档

  • 互连拐点:11 页解析机架内到多机架 Scale-Up 的 XPO/CPX/OCI 蓝图(OCP 2026 全球峰会)
  • AI 时代的相干光技术:17 页解析 Scale-Across、液冷 XPO 与全谱转发器(OCP 2026 全球峰会)
  • XPO 高密度光互连的系统级评估:20 页解析 212G SerDes 平台与 FRO/LRO/LPO 实测(OCP 2026 全球峰会)
  • CPO 与 OCI 标准及未来技术:17 页 Broadcom 精简版演讲提纲(OCP 2026 全球峰会)
  • VCSEL 高密度互连:7 页解析 50G NRZ「慢而宽」阵列与光 PCIe 演示(OCP 2026 全球峰会)

最新评论

暂无评论,欢迎登录后发表第一条评论。

最近访客

👥 今日访客 -
加载中…
© 2026 WaytoICT | 蜀ICP备2020035321号-2 | 隐私政策 | 免责声明
Wechat Pay
Alipay
请使用 支付宝 或 微信 扫码支付