Skip to content

WaytoICT

通往ICT之路 · 光通信与AI网络技术解读

中文English
登录注册
Menu
Technology Optical comms · silicon photonics · CPO → Market Insights Financials · trends · industry → In-Depth Analysis Optical chips, devices & modules → Video Understand a topic in minutes → Documents Latest docs · summit materials →
Menu

Space-Division Multiplexing Fiber

Posted on 2024-02-01 by

Optical fiber transmission capacity is approaching its transmission limit, and a new track is needed to continue expanding capacity.

Among the six signal dimensions, or degrees of freedom (time, wavelength, amplitude, phase, polarization, and space) that affect fiber transmission capacity, currently only space-division multiplexing can better drive fiber transmission capacity.

Space-division multiplexing aims to accommodate more transmission channels on a specified spatial transverse cross-section. Because a single transmission channel is gradually approaching the Shannon limit, using a space-division multiplexing scheme can achieve n-fold capacity expansion.

Space-division multiplexing has multiple approaches, which can perhaps be divided into two major categories.

The first category is to reduce the cross-sectional area occupied by a single single-mode fiber.

This category also has many schemes. One is to reduce the fiber diameter, such as reducing the fiber diameter from 250um to 125um, which can increase unit space by 1.5 times. Another is to use weakly coupled multi-core fiber.

Reducing the spatial area is very helpful for applications. For a large number of fiber channels, such as thousands or tens of thousands of fibers, reducing the space by more than 30% will be very significant.

For data centers, the massive amount of cabling has always been a very challenging problem. Space-division multiplexing will be an effective solution.

For the fiber itself, this type of scheme has no essential change in design, and is not essentially different from traditional fiber, still using several degrees of freedom such as wavelength, amplitude, and phase.

The second category is that the fiber itself changes to support space-division multiplexing. This includes strongly coupled multi-core fiber and few-mode fiber, and there are also multi-core multi-mode fibers in the laboratory. Relatively speaking, strongly coupled multi-core fiber has better prospects. However, given that a new track may be needed to break through the Shannon limit, there may be better schemes in the future. As the rate continues to increase, the system also becomes more dependent on complexity. Although the cost per bit and power per bit are gradually decreasing, simplified schemes are still very much needed to avoid relying on huge computational complexity.

Multi-core fiber is divided into weakly coupled multi-core fiber and strongly coupled multi-core fiber. Strongly coupled multi-core fiber is further divided into random coupling and deterministic coupling types. The difference between weakly coupled and strongly coupled multi-core fiber lies in the spacing between cores. The spacing between cores affects the coupling between core modes. For weakly coupled multi-core fiber, the goal is actually to have no crosstalk at all, keeping each core independent with no influence on each other. However, in practice, for the modes in the core, the light propagating in the cladding can extend to the coating, and it is very difficult to have no crosstalk at all. But with a certain spacing, the crosstalk power can be below 60dB/km, sufficient to reduce the noise caused by crosstalk to an acceptable level.

Three typical types of fiber are shown in the figure below.

Space-division multiplexing fiber

The approximate relationship of crosstalk in multi-core fiber is

Space-division multiplexing fiber

K is the coupling coefficient, L is the propagation length, R is the bending radius, and d is the core spacing.

The crosstalk of the fiber is affected by the fiber’s own defects, bending, twisting, etc. Bending has a relatively large influence, because in a bent fiber, the modes in the core drift to the bending side, and the mode field is also squeezed, thereby increasing crosstalk.

The coupling coefficient, simply understood, is the degree of overlap between two mode fields.

Space-division multiplexing fiber

In an ideal fiber, the modes formed in the fiber are mutually orthogonal, and naturally there is no coupling. This is the foundation of fiber communication. In actual scenarios, the fiber always deviates from the ideal geometric shape, and its internal density and doping concentration are not ideally uniform. The actual refractive index deviates from the ideal refractive index. This deviation brings coupling between two mode fields, or coupling between two modes.

Strongly coupled multi-core fiber, because the spacing between cores is relatively small, even if the fiber has no perturbation, the mode field coupling between cores is inevitable. For weakly coupled multi-core fiber, coupling is crosstalk, forming an additional noise source while increasing loss. If the perturbation is large, weakly coupled multi-core fiber may, after long-distance transmission, also transform into strongly coupled multi-core fiber, causing system failure. For strongly coupled multi-core fiber, the coupling between cores is the basis for its operation, while what needs attention is the coupling between supermodes, and the coupling between supermodes forms crosstalk. Crosstalk and coupling are mutually variable.

For a two-core fiber, if optical power is injected from one core, due to coupling, the optical power forms an overlapping change in the two cores.

Space-division multiplexing fiber

If the two cores are identical, that is, homogeneous fiber, a complete amplitude overlapping change is formed. If the propagation constant difference between the two is large, the coupled power is small. The propagation constant difference affects the degree of coupling.

The coupling of strongly coupled multi-core fiber can be described by coupling theory, but numerical computation simulation is required.

In coupling theory, the mode field of a fiber with n cores is the linear superposition of the independent modes in all cores:

Space-division multiplexing fiber

For strongly coupled multi-core fiber, the several modes formed by this superposition are different from the fundamental mode within the fiber core, and also different from the higher-order modes within the fiber core. These new modes formed by superposition are generally called supermodes.

This can further evolve into the relationship between the core mode field and the propagation constant of the supermode, and this relationship is relatively concise.

Space-division multiplexing fiber
Space-division multiplexing fiber

M is the coupling matrix

For a homogeneous four-core fiber, the coupling matrix is

Space-division multiplexing fiber

Four supermodes are formed, and their propagation constants are respectively, where the second includes two degenerate modes.

Space-division multiplexing fiber
Space-division multiplexing fiber
Space-division multiplexing fiber

Three-core fiber coupling matrix

Space-division multiplexing fiber

Three supermodes are formed, and their propagation constants are respectively, where the first includes two degenerate modes.

Space-division multiplexing fiber
Space-division multiplexing fiber

Two-core fiber coupling matrix

Space-division multiplexing fiber

Propagation constants of the two supermodes:

Space-division multiplexing fiber

Ideal supermodes are orthogonal to each other and do not couple to each other. This forms the basis for information transmission. Strongly coupled multi-core fiber, as the carrier of space-division multiplexing, is actually mode-division multiplexing. n cores have n supermodes, and there can be n multiplexed channels. Compared with weakly coupled multi-core fiber, strongly coupled multi-core fiber has many advantages. Strongly coupled multi-core fiber does not mind the coupling between core modes, and the coupling is necessary. Using the supermodes formed as transmission channels, the corresponding mode field is relatively larger, resulting in better loss performance and nonlinear performance. To form strong coupling, the core spacing becomes smaller, and the space efficiency of strongly coupled multi-core fiber becomes larger.


Related Reading

  • What Types of SDM Space-Division Multiplexing Fiber Are There?
  • Progress of Various MCF Multi-Core Fibers and Their Practical Applications
  • Sumitomo: A Multi-Core Fiber with Low Polarization Mode Dispersion

Enjoy this article?

Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.

Category: Technology

Leave a Reply

You must be logged in to post a comment.

订阅更新

订阅后,新文章发布时第一时间收到邮件通知

李东霏
光互连技术研究者

香农信息技术研究院,专注光模块、CPO、硅光与 AI 光互连的技术解读。

行业报告

光芯片·光器件·光模块 2026 报告汇编(含 OFC 2026)

光芯片 · 光器件 · 光模块
2026 报告汇编(含 OFC 2026)

¥1,900

上/下两册,收录 OFC 2026 一线报告
添加微信 WaytoICT 订购

广告

📢 广告位招商:面向全球光通信客户 侧边栏广告位 Email:Dongfei.li@shannoninstitute.cn

最新文档

  • 互连拐点:11 页解析机架内到多机架 Scale-Up 的 XPO/CPX/OCI 蓝图(OCP 2026 全球峰会)
  • AI 时代的相干光技术:17 页解析 Scale-Across、液冷 XPO 与全谱转发器(OCP 2026 全球峰会)
  • XPO 高密度光互连的系统级评估:20 页解析 212G SerDes 平台与 FRO/LRO/LPO 实测(OCP 2026 全球峰会)
  • CPO 与 OCI 标准及未来技术:17 页 Broadcom 精简版演讲提纲(OCP 2026 全球峰会)
  • VCSEL 高密度互连:7 页解析 50G NRZ「慢而宽」阵列与光 PCIe 演示(OCP 2026 全球峰会)

最新评论

暂无评论,欢迎登录后发表第一条评论。

最近访客

👥 今日访客 -
加载中…
© 2026 WaytoICT | 蜀ICP备2020035321号-2 | 隐私政策 | 免责声明
Wechat Pay
Alipay
请使用 支付宝 或 微信 扫码支付