Skip to content

WaytoICT

通往ICT之路 · 光通信与AI网络技术解读

中文English
登录注册
Menu
Technology Optical comms · silicon photonics · CPO → Market Insights Financials · trends · industry → In-Depth Analysis Optical chips, devices & modules → Video Understand a topic in minutes → Documents Latest docs · summit materials →
Menu

Is the Single-Wavelength 800G Solution Commercially Viable?

Posted on 2020-12-10 by

There are two approaches to increasing optical network transmission rates: one is power-density cost optimization, and the other is performance optimization.

Power-density cost-optimized solutions use standard pluggable technology. They have excellent performance and are the industry workhorse for most applications. Performance-optimized solutions use proprietary technology, aiming to maximize bit throughput under given fiber conditions. They are mainly used in application scenarios requiring “longer distance” transmission, such as DCI (data center interconnect) and submarine transmission.

The latest achievement in performance optimization is single-wavelength 800G technology and its commercial viability. For this, we have two ways to achieve 800G, both using a single optical channel. We call them Method A and Method B here, and their main difference lies in the relationship between the carrier and the optimal channel bandwidth.

Method A: Uses two high-speed carriers, each capable of achieving up to 600G bandwidth, and a flexible channel width of up to 150 GHz.

Is the Single-Wavelength 800G Solution Commercially Viable?

Method B: Uses a single ultra-powerful carrier capable of achieving up to 800G bandwidth, with a constant channel width just over 100 GHz.

Is the Single-Wavelength 800G Solution Commercially Viable?

Using a speedboat design as an analogy, Method B is equivalent to a speedboat where all power comes from a single engine, while Method A splits the power into two engines.

Both methods can achieve 800G transmission in a single channel. To compare them, we look at two practical criteria:

1) Do they have the ability to carry the latest generation of high-speed 400GbE client traffic?
2) How well do they handle fixed-grid and flexible-grid network applications.

Here we mainly discuss the second point. Whether the new technology is compatible with existing fixed networks is very important, that is, whether it can be applied to the current 50 GHz and 100 GHz fixed-spacing WDM optical fiber systems. The reason Method A above can be applied to these networks is that it uses two carriers, each of which can fit into a 50 GHz channel. Two 400G carriers can carry two 400GbE clients for about 200 km, or two 200G carriers can carry one 400GbE client for more than 1000 km. However, Method B completely does not support this deployment because it is based on a fixed-carrier scheme with a channel width greater than 100 GHz.

Let’s look at flexible-grid networks again; both Method A and Method B can be used. Here it depends on the channel spectrum width used. If the preferred channel width is 150 GHz, Method A has an advantage over Method B, carrying two 400GbE client services at 2.5 times the distance of Method B. This is because the OSNR of two 400G carriers within 150 GHz is far smaller than the OSNR of a single 800G carrier above 100 GHz.

But on the optimal channel just over 100 GHz, such as 112.5 GHz, Method B performs somewhat better, with distance further increasing by about 20%. That is, with a narrower channel width, Method B is more spectrally efficient.

As we approach the Shannon limit infinitely, increasing the rate becomes very difficult, so we must deeply study different application scenarios to understand the relative pros and cons of different methods. Finally, to summarize, the comparison of Method A and B above in different 800G transmission scenarios.

Is the Single-Wavelength 800G Solution Commercially Viable?

Related Reading

  • 800G Optical Module MSA: Technical Analysis of 8x100G in SR Scenarios
  • 600G or 800G?
  • Data Center 800G: PAM4 or Coherent Technology?

Enjoy this article?

Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.

Category: Technology

Leave a Reply

You must be logged in to post a comment.

订阅更新

订阅后,新文章发布时第一时间收到邮件通知

李东霏
光互连技术研究者

香农信息技术研究院,专注光模块、CPO、硅光与 AI 光互连的技术解读。

行业报告

光芯片·光器件·光模块 2026 报告汇编(含 OFC 2026)

光芯片 · 光器件 · 光模块
2026 报告汇编(含 OFC 2026)

¥1,900

上/下两册,收录 OFC 2026 一线报告
添加微信 WaytoICT 订购

广告

📢 广告位招商:面向全球光通信客户 侧边栏广告位 Email:Dongfei.li@shannoninstitute.cn

最新文档

  • 互连拐点:11 页解析机架内到多机架 Scale-Up 的 XPO/CPX/OCI 蓝图(OCP 2026 全球峰会)
  • AI 时代的相干光技术:17 页解析 Scale-Across、液冷 XPO 与全谱转发器(OCP 2026 全球峰会)
  • XPO 高密度光互连的系统级评估:20 页解析 212G SerDes 平台与 FRO/LRO/LPO 实测(OCP 2026 全球峰会)
  • CPO 与 OCI 标准及未来技术:17 页 Broadcom 精简版演讲提纲(OCP 2026 全球峰会)
  • VCSEL 高密度互连:7 页解析 50G NRZ「慢而宽」阵列与光 PCIe 演示(OCP 2026 全球峰会)

最新评论

暂无评论,欢迎登录后发表第一条评论。

最近访客

👥 今日访客 -
加载中…
© 2026 WaytoICT | 蜀ICP备2020035321号-2 | 隐私政策 | 免责声明
Wechat Pay
Alipay
请使用 支付宝 或 微信 扫码支付