Skip to content

WaytoICT

通往ICT之路 · 光通信与AI网络技术解读

中文English
登录注册
Menu
Technology Optical comms · silicon photonics · CPO → Market Insights Financials · trends · industry → In-Depth Analysis Optical chips, devices & modules → Video Understand a topic in minutes → Documents Latest docs · summit materials →
Menu

New EUV Photoresists

Posted on 2023-11-09 by

EUV photoresists are photosensitive materials used in semiconductor manufacturing processes, especially in advanced lithography technology. These materials must be able to withstand high-energy EUV photons and provide high-resolution patterning capability. Some of the challenges in developing EUV photoresist materials are that they need to be highly sensitive to short wavelengths; achieving high resolution is critical for producing complex and small-scale patterns at 3 nm; minimizing line edge roughness; and outgassing (contamination) poses production-maintenance problems for manufacturers.

New EUV Photoresists

These innovative materials are usually classified as chemically amplified resists (CAR), non-chemically amplified resists, inorganic EUV resists, and hybrid EUV resists, depending on their formulation or composition. When exposed to EUV light, they undergo chemical or physical changes, enabling accurate pattern transfer onto a surface.

EUV photoresist materials are photosensitive substances that undergo chemical changes when exposed to high-energy EUV photons. EUV photons generate photoacid from photosensitive compounds. This acid catalyzes the deprotection reaction in the resist polymer, making it more soluble in the developer. The amplified reaction improves sensitivity and enables high-resolution patterning. As semiconductor nodes scale to smaller dimensions, maintaining resolution, sensitivity, and pattern fidelity becomes more complex and challenging. New materials, mechanisms, and processing techniques are currently being researched to address these challenges and achieve further miniaturization.

Types of EUV photoresist materials

Chemically amplified resists: chemically amplified resists are the most commonly used EUV photoresists. They use a photoacid generator (PAG) that produces acid when exposed to EUV photons. This acid catalyzes the chemical reaction in the photoresist, causing dissolution of the exposed regions during development. CARs are known for their high sensitivity, making them suitable for low-dose EUV exposure and improving throughput in semiconductor manufacturing. They may find applications in optical devices, displays, and advanced packaging.

New EUV Photoresists

Inorganic EUV photoresists: Inorganic photoresist materials with different EUV absorption coefficients and high etch resistance are important for solving some existing problems. Therefore, many researchers have begun to study the application of inorganic materials in the photoresist field. These materials differ from organic CARs because they are composed of inorganic materials, such as metal oxides or metal-containing compounds. They work by applying metal-oxide systems with acrylic acid as organic ligands to EUV lithography. Compared with organic photoresists, inorganic photoresists are expected to provide higher thermal stability and lower outgassing. They may find applications in extreme environments or specialized semiconductor processes.

Non-chemically amplified resists: unlike CARs, non-chemically amplified resists do not rely on acid-catalyzed reactions. Instead, they undergo photolysis directly upon EUV exposure, causing a change in solubility. These materials usually require higher doses of EUV light for patterning and are being explored for specific applications and process requirements.

Hybrid EUV resists: hybrid EUV resists combine organic and inorganic elements to leverage the advantages of both material types. These materials work by selecting resins for the purification step after the ligand-exchange reaction, namely polystyrene resins functionalized with tertiary amines, piperidine, and dimethylamine. These materials aim to provide higher sensitivity, resolution, and thermal stability, addressing some limitations of purely organic or inorganic resists.

Main challenges in EUV photoresist development

EUV sensitivity: sensitivity is one of the main challenges of EUV lithography; developing and optimizing photoresist materials that can effectively absorb and react with EUV light to produce precise patterns on semiconductor wafers is difficult. EUV photons are scarce and expensive, so photoresist materials with high sensitivity are needed to achieve sufficient throughput of 100 to 120 wafers per hour during manufacturing.

Resolution and LER: as feature sizes shrink, maintaining high resolution without excessive line edge roughness (LER) becomes problematic. Due to the high photon energy, an important potential source of EUV photoresist LER is photon shot noise. The challenge of LER includes minimizing the irregularity or roughness of the developed photoresist line edges that form transistor features. Excessive LER leads to transistor performance variation and reduced chip yield. Manufacturers need to optimize photoresist formulations and process conditions to achieve an LER of 2 nm at a sensitivity of only 70 mJ/cm², with smoother and more precise edges on transistor features.

Outgassing: the outgassing problem in EUV lithography refers to the release of volatile organic compounds (VOCs) or other materials from the photoresist when exposed to EUV light. These outgassed materials may contaminate the surrounding environment, including the optics and mirrors used in EUV lithography equipment. Contamination reduces equipment performance and yield while increasing maintenance requirements. Controlling and minimizing outgassing is critical to maintaining the reliability and efficiency of the entire EUV lithography process.

Thermal stability: EUV exposure generates considerable heat, so stable photoresist materials are required under high-energy conditions. Many applications require coatings with excellent thermal stability. Most commercially available removers rapidly dissolve the photoresist layer after thermal loads of up to 130°C.

Significant progress in new EUV photoresist materials

High-sensitivity, low-dose materials: researchers are exploring innovative chemically amplified resists that react strongly to EUV photons even at lower doses, increasing throughput to 100 wafers per hour and reducing manufacturing costs.

Improved resolution and LER control: new materials such as chemically amplified and inorganic resists aim to reduce LER while maintaining high-resolution patterning capability. Advanced chemical-atomic resist compositions and unique polymer structures play a crucial role in achieving higher sensitivity to EUV light, improving contrast, and reducing LER to below 2 nm.

Reduced outgassing: the development of low-outgassing resists ensures cleaner EUV exposure, thereby improving yield and the reliability of semiconductor devices. Reducing outgassing is critical to maintaining the cleanliness and integrity of the EUV lithography process, which is highly sensitive to contaminants. Semiconductor manufacturers work closely with material suppliers and equipment manufacturers to ensure that the photoresist and other materials used in the EUV lithography process meet strict outgassing requirements and contribute to producing high-quality semiconductor devices.

Thermal-stability solutions: to address the thermal challenges of EUV lithography, researchers are introducing engineered materials with enhanced thermal stability, thereby extending exposure time without compromising performance.

The following materials can be obtained through “Read the original text” in the lower-left corner!

New EUV Photoresists

Related Reading

  • How Are Photoresist Patterns “Copied” onto Chip Material?
  • Do You Know These Properties of Photoresist?
  • Why Is Immersion Liquid Used in Lithography?

Enjoy this article?

Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.

Category: Technology

Leave a Reply

You must be logged in to post a comment.

订阅更新

订阅后,新文章发布时第一时间收到邮件通知

李东霏
光互连技术研究者

香农信息技术研究院,专注光模块、CPO、硅光与 AI 光互连的技术解读。

行业报告

光芯片·光器件·光模块 2026 报告汇编(含 OFC 2026)

光芯片 · 光器件 · 光模块
2026 报告汇编(含 OFC 2026)

¥1,900

上/下两册,收录 OFC 2026 一线报告
添加微信 WaytoICT 订购

广告

📢 广告位招商:面向全球光通信客户 侧边栏广告位 Email:Dongfei.li@shannoninstitute.cn

最新文档

  • 互连拐点:11 页解析机架内到多机架 Scale-Up 的 XPO/CPX/OCI 蓝图(OCP 2026 全球峰会)
  • AI 时代的相干光技术:17 页解析 Scale-Across、液冷 XPO 与全谱转发器(OCP 2026 全球峰会)
  • XPO 高密度光互连的系统级评估:20 页解析 212G SerDes 平台与 FRO/LRO/LPO 实测(OCP 2026 全球峰会)
  • CPO 与 OCI 标准及未来技术:17 页 Broadcom 精简版演讲提纲(OCP 2026 全球峰会)
  • VCSEL 高密度互连:7 页解析 50G NRZ「慢而宽」阵列与光 PCIe 演示(OCP 2026 全球峰会)

最新评论

暂无评论,欢迎登录后发表第一条评论。

最近访客

👥 今日访客 -
加载中…
© 2026 WaytoICT | 蜀ICP备2020035321号-2 | 隐私政策 | 免责声明
Wechat Pay
Alipay
请使用 支付宝 或 微信 扫码支付