In the world of silicon-based optical waveguides, the refractive index difference between the silicon core and the silicon dioxide cladding is very large. Silicon has a refractive index of 3.47 at 1550 nm, while the silicon dioxide cladding has a refractive index of 1.444 at 1550 nm. This means that the flow of light inside the waveguide is confined very strictly, and the waveguide dimensions are very small, only a few hundred nanometers.
Although this small size is helpful for integrating many waveguides together, it also brings a challenge: how to let light smoothly enter the waveguide from the fiber?
Imagine the influence of waveguide dimensions on integration and mode matching: the central part of the fiber (the core) is much larger than the cross-section of the silicon waveguide, nearly 600 times larger. It is like trying to stuff a big apple into a small bottle; we need some special devices to adjust the “shape” of the light so that it can adapt to the waveguide dimensions. To solve the mode mismatch problem, several approaches have been devised:
- Edge coupling technology
- Grating coupling technology
Edge coupling technology is achieved by using a special mode converter and lensed fiber. This method works very well, with very low optical loss of only 0.5 dB. Moreover, light in any polarization state can be coupled well. However, this method can only be used at the edge of the chip, and it requires some complex processing and precise alignment, which increases manufacturing difficulty and cost.
Grating coupling is another method. It is easier to align than edge coupling, and the manufacturing process requires no additional steps, so the cost is lower. The grating coupler can be placed at any position on the chip, which makes the design more flexible and also makes automated testing easier to achieve.
At present, some high-efficiency grating couplers have been developed, with loss controllable to below 1 dB. In addition, there is a technology called the polarization-splitting grating coupler, which has also been proven to be an effective solution, helping to improve the performance and application range of silicon-based optical waveguide technology.
Related Reading
- Why is the TE mode more popular than the TM mode in silicon optical waveguides?
- Silicon optical waveguide: how to ensure the polarization of light at the receiving end?
- Low-Bending-Loss Glass Waveguide Process and Improvement for CPO
Enjoy this article?
Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.