Nanoimprint lithography (NIL), also called NIP in some places, is a printing-and-replication technology used for transferring micro-nano electronic structures. It uses a patterned template to replicate micro-nano structures onto the material to be processed, stamping the pattern onto the material like a seal, similar to what we call embossing.
Nanoimprint lithography was developed mainly because it can break through the resolution limits that traditional photolithography encounters when fabricating extremely small structures. The following is the process flow of nanoimprint lithography: Template fabrication: first, a template with the desired micro-nano structure pattern must be fabricated. This is usually achieved through electron-beam lithography, nanoimprint lithography, or other high-resolution micro-nano processing techniques on silicon or other hard substrate materials.

Coating photoresist: a layer of deformable material such as photoresist is uniformly coated on the surface of the substrate to be processed (such as a silicon wafer). The choice of deformable material depends on the desired pattern features and subsequent process requirements.

Imprinting: the photoresist-coated substrate is brought into contact with the template, and a certain pressure is applied. In thermal NIL, this process may also require heating to a specific temperature to soften the polymer. In UV-NIL, ultraviolet light is applied after imprinting to cure the photoresist.

Demolding and resist removal: the photoresist is cured through ultraviolet irradiation, heating, or other means, then the template is slowly removed, at which point the photoresist has formed a micro-nano structure pattern corresponding to the template. The remaining photoresist is then removed, usually through chemical or mechanical methods.

It can be seen that nanoimprint lithography is very different from photolithography. It is not an optical pattern-replication process; instead, a mold replacing the mask is pressed onto a deformable polymer material, somewhat similar to how we make mooncakes.

Compared with traditional photolithography, as mentioned above, the mold in nanoimprint lithography is equivalent to the mask, the mechanical stamping tool serves the same role as the light source of an exposure machine, and the deformable material is similar to the photoresist.
Although nanoimprint lithography has advantages such as high resolution, low cost, and high efficiency, it has very high requirements for template processing precision. Currently, template fabrication mainly depends on photolithography, especially for the manufacture of nanoscale structures, which makes imprint templates expensive. In addition, for certain materials, especially opaque materials, the use of optical nanoimprint lithography is also limited.
Also, the demolding process after imprinting may encounter difficulties, especially when the adhesion between the template and the material is strong.
Therefore, the possibility of fully adopting this technology in semiconductors is not great, and nanoimprint lithography still has a long way to go.
Thank you for reading!
Published with the permission of OFC.
Related Reading
- New EUV Photoresist
- How Are Photoresist Patterns “Copied” onto Chip Material?
- Do You Know These Properties of Photoresist?
Enjoy this article?
Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.
