Skip to content

WaytoICT

通往ICT之路 · 光通信与AI网络技术解读

中文English
登录注册
Menu
Technology Optical comms · silicon photonics · CPO → Market Insights Financials · trends · industry → In-Depth Analysis Optical chips, devices & modules → Video Understand a topic in minutes → Documents Latest docs · summit materials →
Menu

The Technology Evolution of DSP Chips for 1.6T Coherent Optical Communications!

Posted on 2025-03-31 by

Since the commercialization of CMOS chips and indium phosphide optical device technology in 2008, companies such as Marvell have promoted the transformation of coherent optical modules from traditional fixed equipment to pluggable form through six generations of DSP chip iterations.

Taking the first-generation DSP in the 40 nm process as an example, its power consumption reached 40 W and it supported a transmission distance of 4000 kilometers; whereas the latest 5 nm-process Orion™ chip achieves 2000-kilometer transmission through 800G QAM16-PS modulation technology at 10-20 W power consumption, and integrates LDPC error correction and OTN/Ethernet protocol conversion functions. This technological progress has reduced the volume of optical modules by 60%, making them more suitable for high-density data center deployment.

The Technology Evolution of DSP Chips for 1.6T Coherent Optical Communications!

The industry is currently focused on the research and development of 1.6T single-wavelength transmission technology, which places higher requirements on signal processing. To achieve stable transmission at a 240G baud rate, the Marvell team developed the dual-tone test method.

As shown in the figure below, this method precisely captures high-frequency-band signal distortion by generating a 45 GHz amplitude-envelope signal. The wideband model established on this basis optimized the analog-to-digital converter design, increasing the effective number of bits (ENoB) from 4.8 bit to 5.2 bit while controlling the voltage range within ±0.75 V, improving signal quality by 18%.

The Technology Evolution of DSP Chips for 1.6T Coherent Optical Communications!

Figure: TIA output signal comparison (45 GHz high-gain and low-gain states) (a) clipping phenomenon under high gain (b) comparison of optimal voltage and maximum voltage

The wideband model established on this basis optimized the analog-to-digital converter design, increasing the effective number of bits from 4.8 bit to 5.2 bit while controlling the voltage range within ±0.75 V, improving signal quality by 18%.

In laser co-optimization, the research team found that relying solely on the linewidth indicator is insufficient to cope with sudden frequency fluctuations. By improving the measurement method and adopting 64QAM coding with interleaving depth adjustment (from 32 to 96), the timing-error tolerance was increased by 3 times. This reduced the update frequency of the clock-recovery circuit from once per symbol to once per 8 symbols, cutting power consumption by 22%, while also lowering the requirements for laser performance.

Analog front-end design faces new challenges brought by CMOS process scaling. Each generation of process-node progress (such as from 28 nm to 16 nm) brings about a 2-fold increase in transmission rate. However, although 7 nm FinFET transistors raise the cutoff frequency to 300 GHz, the increase in parasitic capacitance restricts bandwidth expansion. To this end, Marvell integrated a T-coil peaking structure at the input of the transimpedance amplifier, extending the -3 dB bandwidth from 45 GHz to 58 GHz, and suppressed power-supply noise to below 0.8 mVrms through a nested voltage-regulator design. These improvements stabilized the bit error rate of 112G Baud signals within 1E-15 after 30 km fiber transmission.

The Technology Evolution of DSP Chips for 1.6T Coherent Optical Communications!

Figure 2: CMOS process node and transmission rate evolution trend (trend-line annotation: rate doubles every 4.7 years, 1.6T expected to be achieved in 2025)

Power optimization of the receiving-end DSP is crucial. For the 1.6T data stream, the team adopted a folded FFT architecture based on the Radix-2³ algorithm, reducing the number of complex multipliers required for the 128-point transform by 64% (from 1,024 to 372), with latency controlled within 12 ns. At the same time, through algorithmic downsampling, the computational density of carrier phase estimation was reduced by 75%, achieving a 4-fold throughput improvement at the same power consumption.

Cross-domain collaboration has become the key to technological breakthroughs. Marvell worked with optical-component suppliers to develop a photonic integrated chip model, incorporating package impedance fluctuation (±5 Ω) into DSP equalizer training, improving channel-estimation accuracy by 15%. This end-to-end optimization enabled the 1.6T module to achieve the 2000-kilometer transmission target at 20 W power consumption, a 2.3-fold improvement in energy efficiency over the previous generation.

With the 3 nm process expected to enter mass production in 2025, 3.2T transmission technology has entered the pre-research stage.

Reference paper: Toward_1.6T_Low-Power_Coherent_DSP_Challenges_and_Lessons_Learned_from_Preceding_Generations

Reference documents:

Marvell 1.6T AEC DSP Chips and Copper-Cable Interconnect

Leading Optical-Module Companies: 800G and 1.6T Usher in a New Growth Era

Jointly built by several bloggers, the ICT-domain knowledge-base ima Q&A tool is currently free to join. Welcome to experience it:

The Technology Evolution of DSP Chips for 1.6T Coherent Optical Communications!

Related Reading

  • How to Understand the Performance of Coherent Network Solutions
  • For Data Center 800G, PAM4 or Coherent Technology?
  • A Brief History and Popular Science of Digital Coherent Systems

Enjoy this article?

Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.

Category: Technology

Leave a Reply

You must be logged in to post a comment.

订阅更新

订阅后,新文章发布时第一时间收到邮件通知

李东霏
光互连技术研究者

香农信息技术研究院,专注光模块、CPO、硅光与 AI 光互连的技术解读。

行业报告

光芯片·光器件·光模块 2026 报告汇编(含 OFC 2026)

光芯片 · 光器件 · 光模块
2026 报告汇编(含 OFC 2026)

¥1,900

上/下两册,收录 OFC 2026 一线报告
添加微信 WaytoICT 订购

广告

📢 广告位招商:面向全球光通信客户 侧边栏广告位 Email:Dongfei.li@shannoninstitute.cn

最新文档

  • 互连拐点:11 页解析机架内到多机架 Scale-Up 的 XPO/CPX/OCI 蓝图(OCP 2026 全球峰会)
  • AI 时代的相干光技术:17 页解析 Scale-Across、液冷 XPO 与全谱转发器(OCP 2026 全球峰会)
  • XPO 高密度光互连的系统级评估:20 页解析 212G SerDes 平台与 FRO/LRO/LPO 实测(OCP 2026 全球峰会)
  • CPO 与 OCI 标准及未来技术:17 页 Broadcom 精简版演讲提纲(OCP 2026 全球峰会)
  • VCSEL 高密度互连:7 页解析 50G NRZ「慢而宽」阵列与光 PCIe 演示(OCP 2026 全球峰会)

最新评论

暂无评论,欢迎登录后发表第一条评论。

最近访客

👥 今日访客 -
加载中…
© 2026 WaytoICT | 蜀ICP备2020035321号-2 | 隐私政策 | 免责声明
Wechat Pay
Alipay
请使用 支付宝 或 微信 扫码支付