Skip to content

WaytoICT

通往ICT之路 · 光通信与AI网络技术解读

中文English
登录注册
Menu
Technology Optical comms · silicon photonics · CPO → Market Insights Financials · trends · industry → In-Depth Analysis Optical chips, devices & modules → Video Understand a topic in minutes → Documents Latest docs · summit materials →
Menu

Differential Drive and Common-Mode Rejection in Optical Transceivers

Posted on 2025-09-24 by

The more fundamental a principle is, the harder it is to write about. Take the “differential signal & common-mode rejection” I wanted to discuss today, for example — for a moment I didn’t know where to start.

Because there are simply too many excellent articles on the topic.

There’s no way around it: this concept is too ubiquitous in our optical device field. Let’s go straight to real-world examples.

For instance, the “HGGenuine’s Differential Packaging Optical Transceiver Solution” we introduced before has, at its core, a packaging structure based on differential signal driving.

Differential Drive and Common-Mode Rejection in Optical Transceivers

Another example: the 226G EML chip that Lumentum showcased at OFC 2025 also adopts a differential drive architecture.

Differential Drive and Common-Mode Rejection in Optical Transceivers

So today, rather than laying out the textbook definitions of the basics, let’s stick close to the practical applications in optical devices. First, let’s look at two of the most basic schematic diagrams to build an intuitive impression:

Differential Drive and Common-Mode Rejection in Optical Transceivers
Differential Drive and Common-Mode Rejection in Optical Transceivers

To help everyone understand better, let’s start from a very practical scenario — this is also my writing style.

At the receiver end of an optical transceiver, the optical signal is converted into a current by the photodetector, and this current is then sent into a TIA (transimpedance amplifier), where it is converted into a voltage signal.

Differential Drive and Common-Mode Rejection in Optical Transceivers

The current signal produced by the photodetector is very weak, and sending it directly to the downstream digital circuits (such as a limiting amplifier or clock recovery circuit) cannot be processed.

The core task of the TIA is to linearly and low-noise amplify this weak current signal into a clean, sufficient-amplitude voltage signal.

But if the traditional single-ended system is retained, a problem arises: during amplification, not only is the useful signal amplified, but the various noises coupled into the line from outside are also amplified together.

Differential Drive and Common-Mode Rejection in Optical Transceivers

This is like answering a phone call in a noisy subway station — the surrounding ambient noise is so loud that it is hard to hear clearly what the other person is saying.

What if differential signaling is used instead? Differential signaling transmits a pair of signals with the same amplitude but exactly opposite phase through two wires.

During transmission, the signal can be decomposed into two components: the differential-mode signal (the useful information) and the common-mode noise (the useless interference).

Differential Drive and Common-Mode Rejection in Optical Transceivers

A differential TIA has strong rejection of the noise common to both wires (common-mode noise), and only responds to the voltage difference between the two wires (the differential-mode signal). That is, the common-mode noise generated in the line is suppressed.

That’s right — the common-mode noise rejection emphasized by the Lumentum EML chip mentioned earlier makes use of exactly this basic principle.

So, a core purpose of introducing differential signal driving in high-speed optical devices is to effectively suppress common-mode noise.

In addition, by exploiting the difference in magnetic field induction characteristics between differential-mode signals and common-mode noise, there is also a commonly used passive device called a common-mode filter, also known as a common-mode choke, which can be specially used to suppress common-mode noise transmitted on the line.

For common-mode noise, it presents a very high impedance:

Differential Drive and Common-Mode Rejection in Optical Transceivers

While for the signal, it is “transparent”:

Differential Drive and Common-Mode Rejection in Optical Transceivers

Thanks for reading. If there are any inaccurate understandings, please forgive me and point them out!

Recommended reading:

ZTE: Innovation in Heat Sink and Coaxial Packaging Structures for Optical Transceivers

Huawei & HGGenuine: 50G PON Optical Transceiver Packaging Technology

Enjoy this article?

Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.

Category: Technology

Leave a Reply

You must be logged in to post a comment.

订阅更新

订阅后,新文章发布时第一时间收到邮件通知

李东霏
光互连技术研究者

香农信息技术研究院,专注光模块、CPO、硅光与 AI 光互连的技术解读。

行业报告

光芯片·光器件·光模块 2026 报告汇编(含 OFC 2026)

光芯片 · 光器件 · 光模块
2026 报告汇编(含 OFC 2026)

¥1,900

上/下两册,收录 OFC 2026 一线报告
添加微信 WaytoICT 订购

广告

📢 广告位招商:面向全球光通信客户 侧边栏广告位 Email:Dongfei.li@shannoninstitute.cn

最新文档

  • 互连拐点:11 页解析机架内到多机架 Scale-Up 的 XPO/CPX/OCI 蓝图(OCP 2026 全球峰会)
  • AI 时代的相干光技术:17 页解析 Scale-Across、液冷 XPO 与全谱转发器(OCP 2026 全球峰会)
  • XPO 高密度光互连的系统级评估:20 页解析 212G SerDes 平台与 FRO/LRO/LPO 实测(OCP 2026 全球峰会)
  • CPO 与 OCI 标准及未来技术:17 页 Broadcom 精简版演讲提纲(OCP 2026 全球峰会)
  • VCSEL 高密度互连:7 页解析 50G NRZ「慢而宽」阵列与光 PCIe 演示(OCP 2026 全球峰会)

最新评论

暂无评论,欢迎登录后发表第一条评论。

最近访客

👥 今日访客 -
加载中…
© 2026 WaytoICT | 蜀ICP备2020035321号-2 | 隐私政策 | 免责声明
Wechat Pay
Alipay
请使用 支付宝 或 微信 扫码支付