OCS (Optical Circuit Switching) is a hot technology in AI data center networking. It does not parse data packets; instead, it directly establishes configurable pure-optical paths between input and output ports, so the optical signal passes through the switch without any optical-electrical conversion. This is fundamentally different from packet-switching electrical devices such as Ethernet switches and InfiniBand switches: an electrical switch must convert the optical signal to electrical, perform table lookups and forwarding, then convert back to optical, whereas OCS lets the light pass through “as is”.
What Is OCS: Starting from the Name “Optical Circuit”
Switching in communication networks falls broadly into two categories: packet switching and circuit switching. The Ethernet we use every day is packet switching — data is cut into packets, and every switch must read the packet header and consult the routing table before forwarding. Circuit switching, by contrast, first establishes an end-to-end path, after which all data travels directly along that path; the telephone network is a classic example. OCS brings the idea of circuit switching to the optical layer: devices such as micro-mirrors change the propagation path of light, “bridging” between fiber ports.
OCS therefore has two distinctive features. First, it is transparent to data rate and protocol — once the bridge is built, signals at 100G or 1.6T, running any protocol, all pass through this optical path, and the switch itself needs no upgrade. Second, its switching speed is on the order of milliseconds, far slower than the nanosecond forwarding of electrical switches. Therefore OCS does not replace the per-packet-forwarding core switch, but rather handles tasks such as “periodic topology reconfiguration”.
Why AI Data Centers Need OCS
The communication pattern of AI training clusters is highly regular: all GPUs in a training job stay tightly interconnected for a long time, and the network only needs to be reorganized when switching jobs. This matches OCS’s “slow reconfiguration, fast direct connection” characteristics exactly. Google was the earliest large-scale practitioner, using optical circuit switches to build the topology of its TPU clusters. When training jobs change, millisecond-level reconfiguration replaces physical rewiring, while also offloading a large amount of traffic from the electrical switching layer, significantly reducing network power consumption and latency. As 800G and 1.6T optical modules become widespread, the power and cost pressure on electrical switches grows, and the combination of “optical interconnect + OCS topology reconfiguration” is being adopted by more and more hyperscale data centers as an architectural option.
The Core Technology of OCS: MEMS Micro-mirror Arrays
Mainstream OCS is based on MEMS (Micro-Electro-Mechanical Systems) technology: hundreds or thousands of micro-mirrors capable of two-dimensional deflection are fabricated on a chip. Input light is collimated and strikes a micro-mirror, which tilts to different angles to reflect the light to different output micro-mirrors, then couples it into the output fiber. Two mirrors work together to achieve arbitrary “input-port to output-port” pairing. With closed-loop control, insertion loss and crosstalk can be kept stably low. Besides MEMS, the industry also has piezoelectric ceramic actuation, magneto-optical switches, silicon-based waveguide switches, and other routes, each with trade-offs in switching speed, port count, and cost — this is consistent with the use of the thermo-optic effect and directional couplers as optical switches inside silicon photonics chips, just at a different scale and form factor.
Industry Landscape: Who Makes OCS
OCS players fall roughly into three layers. Component layer: core components such as MEMS micro-mirrors, collimator arrays, and fiber arrays are supplied by optical component giants like Coherent (formerly II-VI) and Lumentum. System layer: Google develops its own OCS for its clusters, while Lumentum’s R300 optical circuit switch provides 300×300 port scale across the O+C bands for data center customers — its technology route is covered in our earlier article “Lumentum: OCS Technology Roadmap and Industry Evolution“. Demand layer: Nvidia is also exploring the synergy of optical switching and CPO in its next-generation networking. From financial reports, OCS has become a clear new growth driver for optical component vendors; Coherent listed data center optical interconnect and OCS as strategic priorities in its FY2026 results.
Limitations of OCS: Not All Traffic Is Suitable
OCS is not a universal key. Its millisecond-level switching speed means it cannot do per-packet forwarding; bursty East-West traffic that requires fine-grained scheduling still relies on electrical switches. Although OCS can reach hundreds of ports, there is still a gap compared with the massive high-speed channels of electrical switch chips. Moreover, once an optical path is established, mid-path fault recovery, broadcast, and multicast are less flexible than in electrical networks. The industry consensus is therefore “optical-electrical collaboration”: the spine layer or inter-cluster links use OCS for topology reconfiguration, the leaf layer uses electrical switches for packet forwarding, and CPO (co-packaged optics) shortens copper interconnect between devices — each playing its own role.
FAQ
What is the relationship between OCS and optical modules? OCS is a network device, while optical modules are transceiver components. Optical modules handle the conversion between electrical and optical signals (where the EML electro-absorption modulated laser is one of the core light sources of high-speed modules), while OCS lets optical signals pass through without conversion — one handles “translation” and the other handles “passage”.
Will OCS replace electrical switches? Not in the short term. The two are complementary: OCS handles topology reconfiguration and traffic offloading, while electrical switches handle real-time packet forwarding. To understand the full evolution path of data center optical interconnect from pluggable modules to OBO, NPO, and CPO, read “Pluggable, OBO, NPO and CPO“.
Further Reading
- Lumentum: OCS technology roadmap and industry evolution views
- Coherent’s business structure and FY2026 results
- What is an EML? Working principle, applications and evolution of electro-absorption modulated lasers
- Basics: understanding optical module naming
- HG Genuine: 3.2T solution progress and NPO evolution roadmap
Enjoy this article?
Subscribe to get new optical communication insights delivered to your inbox. Free, unsubscribe anytime.