This is a WaytoICT paid-reading column. The full technical analysis and accompanying schematics require a ¥9.9 payment to unlock! From the relationship between waveguide width and optical confinement factor above, it can be seen intuitively that when the waveguide width narrows, the optical confinement factor of the high-mesa structure can still remain high, while the…
Technology
Fundamentals: COB and COC
This article is part of the WaytoICT paid reading column. The technical analysis and accompanying schematics require a ¥9.9 payment to unlock! Moreover, the PCB materials used in COB, such as resin, have a large difference in thermal expansion coefficient compared to the chip, and the PCB itself has poor thermal conductivity. When the temperature…
Why Does an EML Transmit Farther Than a DFB?
Let’s first explain a concept: chirp. In AM (amplitude modulation), we distinguish “1” and “0” by the level of the signal amplitude. Modulation in which the frequency changes over time is FM (frequency modulation). The laser used at the very beginning was DML direct modulation, also called internal modulation. Its principle is to apply an…
Basics: Eye Diagram
The eye diagram is used to judge whether a signal is good or bad. It can help us see the amplitude noise, timing jitter, and inter-symbol interference in the signal. How is it generated? The device first captures a segment of the actual signal, and then cuts the signal into many small segments according to…

