TSMC has proposed a three-dimensional glass waveguide approach for high-density co-packaged optics (CPO) interconnect. The core idea is to use multi-layer waveguide channels inside a glass substrate to solve the mismatch between the optical ports of the optical engine and the fiber ports. In a CPO package, multiple optical engines surround the ASIC, with fiber…
NTT: Thin-Film EA-DFB Laser Evolution and System-Level Validation for CPO
Over the past few years, NTT has been developing III-V/Si heterogeneously integrated EA-DFB lasers and electro-absorption modulators (EAMs), with the goal of putting them into co-packaged optics (CPO) solutions. The 2025 design was explicitly aimed at CPO, achieving uncooled operation with wide-temperature and wide-wavelength tolerance. It used an external light source, which is advantageous for…
How Fiber, EIC, and PIC Interconnect in CPO
In co-packaged optics (CPO), the electrical integrated circuit (EIC) and photonic integrated circuit (PIC) are typically integrated through 3D stacking, which brings clear benefits: shorter interconnect distances, higher bandwidth density, and lower power consumption. Two main approaches are used today: one is through-silicon vias (TSV) drilled directly through the chip, and the other is high…
Basics: Heterogeneous and Hybrid Integration of Thin-Film Lithium Niobate
Silicon can form waveguides and optical switches: using the plasma dispersion effect, applying an external voltage changes the carrier concentration and hence the refractive index, enabling silicon-based MZMs or microring modulators. But silicon has no linear electro-optic effect, and modulation relies on carrier transport, making it hard to achieve high speed, low voltage, and low…