In the field of communications, the direct detection (DD) system is a very practical technology. It realizes information transmission by detecting the modulated optical power (also commonly referred to as the optical field intensity or light intensity). In a traditional DD system, the receiving end mainly consists of a photodiode (PD), while the transmitting end…
Animation: What Is the Difference Between FP Lasers and DFB Lasers?
Both FP lasers and DFB lasers are semiconductor lasers, but they differ in emission spectral linewidth, single-mode performance, modulation bandwidth, and temperature stability. Please watch our carefully produced animation below: Welcome to follow us; your attention will be the greatest motivation for our continuous output! Related Reading Side-Mode Suppression Ratio and the Dual Peaks of…
What Is Optical Circuit Switching (OCS) Technology?
This article is sourced from the “ODCC-2024 AI Network Optical Switch Technical Report”; the download method is provided at the end of the article! The optical switch is responsible for establishing and breaking connections between fibers. High-performance optical switching can achieve millisecond-level or faster switching speeds, which is crucial for meeting the dynamic traffic…
A Brief Analysis of InfiniBand Network Architecture
The InfiniBand network architecture can be used to avoid some of the shortcomings of the PCI bus: Infiniband Protocol Layers and Network Structure The Infiniband protocol adopts a layered structure, with each layer independent of the others, and the lower layers provide services to the upper layers. The physical layer defines how bit signals are…


