In optical fiber communications, nonlinear effects are widely known, but what exactly is the specific meaning of the concept of nonlinear length? Nonlinear length is a key parameter in optical fiber communications used to quantify the significant phase change accumulated by an optical signal due to nonlinear effects. When the optical power is high or…
Why Do We Need PAM4?
PAM4 is a type of PAM (Pulse Amplitude Modulation) modulation technique. PAM signals are a popular signal transmission technology after NRZ (Non Return-to-Zero), and also a representative of multi-level modulation technology, now widely used in high-speed signal interconnection. Typical waveforms of NRZ and PAM4 signals are shown in the figure below. On the right is…
How Should Optical Power Balancing Be Done in DWDM Systems?
This article is mainly written for the designers and planners of DWDM networks, because they need to estimate the optical power levels at various input and output points across the entire link, span, or network. This information is very important for actual deployment or commissioning. Ideally, we hope that the theoretical values and actual values…
Fundamentals of High-Performance Networking
Among the traditional pillars of data center infrastructure (namely compute, storage, and networking), networking is unique because it has no inherent value on its own. While a standalone server can still compute and storage devices can still hold data, the value of the network depends solely on the information it transports. The same logic applies…



